|Category : Pharmacy Equipments|
|SPECIAL FEATURES OF AUTO-COATER|
a.. Complies with the highest standard of GMP regulation.
b.. Maintain uniformity of coating.
c.. Eliminates manual reference and coater's expertisation.
d.. Highly efficient spray system with spray guns, controlling the quality
of coating of Tablets.
e.. Auto spray stop in case of disturbance in pan drive to protect tablets
or granules from any damage due to system failure.
f.. Pan cabinet is absolutely air tight and ensures no pollution in
g.. Depending on shape, size and pattern of Rolling of Tablets, the
spraying angle can be adjusted with the device within the spray gun.
h.. Easy adjustment device for levelling the cabinet.
i.. Close compact layout. PLC controller and peristaltic pump fitted with
cabinet itself to avoid floor space occupation.
j.. Dose, pause and drying cycle can be revalidated with the help of PLC.
CONSTRUCTION DETAIL OF AUTO COATER
a.. A perforated cylindrical vessel of SS-316 fixed on a hanging drive
shaft fitted with 8 Nos. Baffles of SS-316 kept in an Air-tight cabinet made
of SS-304 (process contact parts are in SS-316 and other components in
Free hanging drum eliminates all mechanical components in the coating
Sealing partition isolation panning area from technical zone.
Rounded interior corners for efficient cleaning.
Large side doors allow complete access to the coating chamber for cleaning
b.. Highly efficient spray system, with sophisticated spray guns,
completely free from choking problem, controls both the application rate and
the droplet size for all types of coating.
c.. In general, Solace spray gun is of size 1mm or 1.5mm as per customer's
We generally provide Spray gun as usual practices.
d.. Peristaltic Pump is a versatile variable speed pump provided with
Digital controller for precise speed regulation and rapid priming facility
for accurate closing.
e.. Solution holding Tank: - The tank is made of SS-316, with pneumatic
stirrer and the entire set is portable and easy to handle. A SS stirrer with
well fitted Blade inside gives a solution with speed control.
f.. Hot air inlet blower fitted with Steam radiator of SS-304, Coarse
filter of 20 micron, 5 micron pre-filter & 0.3 micron Hepa filter.
g.. Hot air exhaust unit driven by suitable Blower Motor connected with
SS-304 Duct line and Silencer.
h.. The duct line of the air inlet blower and exhaust blower will be
provided with separate auto-damper positioner controlling device for
monitoring the condition of air flow in the pan cabinet, facilitate quicker
drying at lower temperature.
i.. Auto unloading of Tablets - Inserting the discharge scoop inside the
pan at the time of rotation, entire coated material can be taken out.
j.. Coating pan Drive assembly with appropriate Motor FLP/440 Volt/ 3
Phase coupled with electrically operated speed Variator and gearbox to
achieve the pan speed range from 1 to 15 RPM.
k.. Electro-pneumatically operated control panel complete with PLC system.
l.. An integrated CIP (Clean-in-place) washing system complete with pump,
jet nozzle, with sink and drain.
m.. Differential pressure gauges are provided to detect the static
pressure developed within the system.
TECHNICAL SPECIFICATION OF AUTO-COATER - 24"
a.. MAIN PAN UNIT
1.. CAPACITY - 10 to 12 Kgs.
2.. PAN DIA - 610 mm (Perforated 3mm hole size)
3.. PAN MOUTH DIA - 300 mm
4.. PAN RPM - 1 to 15 (Variable)
5.. PAN MOC - SS-316
6.. PAN CABINET - SS-304
7.. HOT AIR SUPPLY HOOD - SS-304
8.. EXHAUST AIR HOOD - SS-304